Snap-Tite

Printer-friendly version
926 Baxter Ave.
Louisville, KY
40204
800-CULVERT

Products

  • Snap-Tite offers a no-dig solution to culvert lining and culvert rehab. The Snap-Tite Culvert Lining System rehabilitates a failing culvert lining system without the need to remove the existing...
  • A no-dig solution to culvert lining and rehab challenges, Snap-Tite’s patented joint and installation system replaces failing culvert piping without the removal of deteriorated pipe. Segments of HDPE...
  • Snap-Tite is a no-dig solution to culvert lining and rehab challenges. For many years, Snap-Tite has made its mark as an excellent option for rehabilitating culverts that are failing structurally,...
  • The Snap-Tite Hydro-Bell Culvert Inlet Device uses newer materials to capitalize on the effects of culvert fluid dynamics. Through this design, it is now possible to maximize hydraulic efficiency and...
  • Installed as many as 50 years ago, many culverts are significantly rusted and near failure. A "fish friendly" solution to these failing culverts that is economical, easy-to-install and non-disruptive...
  • Snap-Tite’s patented joint and installation system eliminates the need to remove failing culverts. Small segments are "snapped" together, all with water-tight seals. With Snap-Tite's ease of...
  •   A no-dig solution to culvert lining and rehab challenges, Snap-Tite’s patented joint and installation system replaces failing culvert piping without the removal of deteriorated pipe. Segments of...
  • A study conducted by Utah State University determined that Snap-Tite’s inlet control device, the Hydro-Bell, increases hydraulic flow by approximately 30% relative to the flow through a standard...
  • Snap-Tite’s patented joint and installation system eliminates the need to remove failing culverts. Small segments are snapped together, all with water-tight seals. With Snap-Tite's ease of...
  • Snap-Tite’s patented joint and installation system eliminates the need to remove failing culverts. Small segments are snapped together, all with water-tight seals. With Snap-Tite's ease of...
  • Snap-Tite’s patented joint and installation system eliminates the need to remove failing culverts. Small segments are snapped together, all with water-tight seals. With Snap-Tite's ease of...

DOTs and contractors are turning to Snap-Tite, the patented joint and culvert/drainage rehab system for easier, safer and faster installations.

Failing culverts are no match for Snap-Tite. Easier. Faster. Safer. This step-by-step installation video demonstrates the new way to repair, rehab or replace!

The Gulfport-Biloxi International Airport in Gulfport, Miss., was undertaking an airport improvement project that included repairing, repaving, and adding new runways and taxiways. As part of this improvement project, the airport discovered several aging and deteriorating drainage culverts under...
A large corporation in the Boulder, Colo., area experienced a serious situation on its property when a pair of 48-in. elliptical corrugated metal pipes (CMP) collapsed in the immediate vicinity of many critical utilities. The pipes were located at the very end of the storm-water system that handles...
Many corrugated metal pipe (CMP) culverts across the country will eventually experience rusting, corrosion or some form of deterioration. In the town of Ketchikan, Alaska, a 48-in. CMP culvert that ran underneath a busy two-lane road was experiencing extreme deterioration so severe that large holes...
The objective of this study is to determine the inlet design coefficient for the Snap-Tite Hydro-Bell. The inlet design coefficient is necessary to accurately predict head loss, or flow, through a high-density polyethylene (HDPE) Snap-Tite Culvert Relining pipe using the Hydro-Bell in submerged...
Overlay Init