BRIDGE CONSTRUCTION: Indiana bridge replacements to use slide-in construction method

Contractors will use accelerated bridge construction to build the replacements next to the current bridges, sliding them in place when finished

Accelerated Construction News WTTV-TV Indianapolis March 14, 2017
Printer-friendly versionSend by email

Slide-in construction has been announced as the accelerated bridge construction (ABC) method contractors plan to use to replace the twin three-span bridges carrying eastbound and westbound I-70 traffic over S.R. 121 / New Paris Pike in Wayne County, Ind.

 

Construction will require recurring overnight lane closures on eastbound and westbound I-70 between 9 p.m. and 6 a.m. between S.R. 227 and U.S. 40.

 

During the demolition and slide of each bridge, that direction of traffic will be reduced to one lane and shifted across the median for up to 13 days while the existing structure is removed and the new bridge deck is slid into place. At least one lane of traffic will be maintained in each direction.

 

S.R. 121 / New Paris Pike will be closed under the I-70 bridges for a maximum of 60 days while S.R. 121 pavement and the I-70 bridges are rebuilt. A specific closure date will be announced. During the closure of S.R. 121, highway traffic will be detoured south to U.S. 40 via Indiana Route 227, U.S. 27 and Ohio Route 320.

 

The new bridge deck will be built on temporary supports adjacent to the existing bridge. After the new bridge is built, that direction of traffic will be reduced to one lane and temporarily shifted across the median to share the other side of the interstate with the opposing direction of traffic separated by concrete barriers. The existing bridge will be demolished and the new bridge will slide laterally into place. The approaches to the new bridge will be rebuilt, and traffic will be returned to its normal configuration. This sequencing will occur twice, once for each bridge and direction of traffic.

 

Construction is anticipated to begin in early April 2017 and finish before June of 2018.

 

Overlay Init