Steel Beams

Figure 1. Structural adhesive being injected into a steel connection.
Figure 1. Structural adhesive being injected into a steel connection. Image: Carsten Kunde from Diamant
Corrosion is a common deterioration mode of steel bridges, leading to expensive maintenance operations. Crevice corrosion is a prevalent form of…
October 05, 2021
Arlington Memorial Bridge project reaches completion after two-year rehab
Image: National Park Service
The National Park Service (NPS) recently reopened the rehabilitated Arlington Memorial Bridge to motorists, pedestrians, and bicyclists in Washington…
December 07, 2020
Beam placement in progress for new I-20 bridge in Jackson, Mississippi
Image: Mississippi DOT
Crews are continuing to make headway on beam placement for the new I-20 bridge in Jackson, Mississippi after erecting a self-propelled modular…
December 04, 2020
The Illinois Tollway is preparing to open the new northbound Mile Long Bridge to traffic this week, marking the halfway point in the $500 million …
November 25, 2020
Acrow Bridge has announced two of its temporary modular steel lift bridges are being used to allow uninterrupted vehicular and vessel passage during…
May 22, 2020
Final beam installed at Gerald Desmond Bridge replacement project in California
Image: Port of Long Beach
Almost two years after construction began on the main span of the new bridge to replace the Gerald Desmond Bridge at the Port of Long Beach,…
April 23, 2020
Cline Avenue Bridge in Indiana more than halfway complete
Image: Cline Avenue Bridge LLC / United Bridge Partners
The builders of the Cline Avenue Bridge in East Chicago, Indiana, recently announced that the bridge construction project is more than halfway…
March 06, 2020
AASHTO NSBA Steel Bridge Fabrication guidelines
Image: AASHTO / NSBA
The American Association of State Highway and Transportation Officials (AASHTO) and the National Steel Bridge Alliance (NSBA) recently released a new…
November 04, 2019
Subscribe to Steel Beams
expand_less