The new Cat TH255C telehandler—with a rated load capacity of 5,500 lb and a maximum lift height of 18.33 ft—features a powerful, compact design that accommodates both a wide range...
The Cat C4.4 engine on the three new models in the F Series — the 416F, 420F and 430F — upgrades power while staying up to Tier 4 Interim emissions standards features the Cat ...
Caterpillar Inc., Peoria, Ill., has introduced the PM-200 cold planer (Circle 928). The PM-200 features the electronically controlled Cat C18 engine with ACERT technology, dual...
The RM500 from Caterpillar combines excellent performance and reliability to achieve the most demanding job specifications while maximizing machine uptime, working well in both...
Caterpillar announces the new, seven-model lineup of M-Series motor graders. The new machines feature a number of concepts in motor grader design—most notably a pair of joysticks...
The new Caterpillar 938H wheel loader and IT38H with integrated tool-carrier linkage feature the Cat C6.6 engine with ACERT technology for responsive power and low emissions. ...
Caterpillar has introduced three new midsize hydraulic excavators: the 320D L with standard swing radius; the 320D LRR with reduced swing radius; and the 321D LCR with compact...
Four new Caterpillar C-Series skid-steer loaders—246C, 256C, 262C, 272C —set new standards in machine control with features such as electrohydraulic joystick control of the hydrostatic...
Caterpillar Inc.’s Barber-Greene BG260D (Circle 906) is a high-production, 10-ft wheel-type asphalt paver that features a Cat C7 engine with Acert technology, dual operator stations...
Managing the heavy equipment fleet for any municipality can be a rewarding job. But there are challenges too, particularly if your agency is under pressure to buy based solely...
The 962M operates on a Cat C7.1 ACERT engine, and is equipped with built-in proven technologies to help meet expectations for productivity and fuel efficiency. This wheel loader...
The 777G will haul material faster and more efficiently with increases in torque, new transmission controls and higher travel speeds. A 7% increase in torque (net 3,899 lb-ft)...
This telehandler uses a TD 2.9L L4 engine with 74 hp. Maximum torque on the TH255 at 1,800 rpm is 193 ft-lb. The operating weight with carriage and forks is 11,000 lb. It has ...
The 35-ton 335F CR is the largest minimum-swing-radius excavator available, with just 7 in. of tail swing over the side of 33-in. track shoes. It works at a 16% fuel efficiency...
The power train offers maximum performance through Electronic Torque Management, standard two-speed travel and an electronic hand/foot throttle with decel pedal capability.
The M Series motor graders are designed to help get more work done in less time. Features include a Cat C9.3 ACERT engine at 200 net hp. At 2,000 rpm, the maximum torque on the...
The Cat 420F2 backhoe loader puts all the machine controls at the operator’s fingertips to operate all auxiliary controls with thumb rollers. It enables operators to move from...
The Cat 315F operates with a Cat C4.4 ACERT engine at 97 hp. The operating weight on the excavator is 37,794 lb. The swing torque is at 22,790 lb-ft while the swing speed is at...
The D6T dozer features a smooth-shifting, fully automatic four-speed Cat transmission that continuously optimizes the power train for the application. It helps save fuel and operator...
An optimized drum yoke design, more amplitude and the Cat pod-style vibratory system provides enhanced compaction force for the CS56B. This vibratory soil compactor operates at...
The CB66B is a 13-metric-ton vibratory compactor equipped with 84-in. drums. This high-production model delivers excellent mat density, good visibility and comfort, fuel efficiency...
This asphalt screed has a standard weight of 8,973 lb and a maximum paving width of 33 ft. The SE60 V XW delivers extremely tight mat textures with high densities. It utilizes...
This mid-sized, rubber-track paver features advanced control technology and quick-heating electric screeds. It features the exclusive Cat Mobil-Trac rubber track undercarriage...
This high-production, rubber-track paver excels on airport runways, interstates, highways and other large jobsites. The dual operator stations provide complete control and good...
The Cat 938M small wheel loader has an improved optimized Z-bar loader linkage that delivers the quick-loading performance of a traditional Z-bar with the parallelism and load...
This telehandler uses a TD 2.9L L4 engine with 74 hp. Maximum torque on the TH255 at 1,800 rpm is 193 ft-lb. The operating weight with carriage and forks is 11,000 lb. It has ...
The type of up-close, space-restricted work that can be done with such a unique, heavy-duty machine as the 335F is nearly unlimited. The hydraulic system supports lifting up to...
High-performance power train on the 299D2 XHP provides maximum performance and production capability through the Electronic Torque Management system, standard two-speed travel...
Angled cab doors, a tapered engine enclosure and patented sloped rear window assure excellent visibility to the work area for this motor grader. The 140M2 has a C9.3 ACERT VHP...
The standard tail-swing design on the 307E2 incorporates a counterweight that extends further back on the machine for greater stabil- ity. Bucket rotation of 180° provides greater...
The Cat 420F2 backhoe loader puts all the machine controls at the operator’s fingertips to operate all auxiliary controls with thumb rollers. It enables operators to move from...
The Cat 315F operates with a Cat C4.4 ACERT engine at 97 hp. The operating weight on the excavator is 37,794 lb. The swing torque is at 22,790 lbf-ft while the swing speed is ...
The D6N has a new transmission with lock-up clutch torque converter that delivers ease of operation, increased net power, plus a 10-15% improvement in fuel efficiency. The Cat...
The B20 Top Mount is built for quarry, road construction, demolition, utility work and general construction. It delivers 400-800 blows per minute. The operating pressure on the...
An optimized drum yoke design, more ampli- tude and the Cat pod-style vibratory system provides enhanced compaction force for the CS56B. This vibratory soil compactor operates...
The CB66B is a 13-metric-ton vibratory compactor equipped with 84-in. drums. This high-production model delivers excellent mat density, good visibility and comfort, fuel efficiency...
This asphalt screed has a standard weight of 8,973 lb and a maximum paving width of 33 ft. The SE60 V XW delivers extremely tight mat textures with high densities. It utilizes...
The AP555E provides all of the technology and capabilities of a large asphalt paver in a smaller, more mobile size. It excels in a wide range of applications from routine commercial...
This high-production, rubber-track paver excels on airports runways, interstates, highways and other large jobsites. Its high travel speed, flota- tion and traction deliver superb...
The new D6K2 dozer is smarter and more efficient than ever. It comes equipped with standard Grade technologies like Slope Assist to make it easier for even less experienced operators...
The CS56B Vibratory Soil Compactor combines world-class productivity with outstanding operator comfort while continuing the legacy of durability, reliability and ease-of-service...
The Cat CB54B is a 10 ton roller with 1700 mm (67") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials. It features exceptional...
The SE60 V Vibratory Screed is equipped with rear-mounted extenders and fast heating screed plates, making it a perfect fit for parking areas, business developments, and other...
The AP555E provides all of the technology and capabilities of a large asphalt paver in a smaller, more mobile size. It excels in a wide range of applications from routine commercial...
The AP1055F is a high-production, rubber track paver that excels on airports runways, interstates, highways, and other large jobsites. It's high travel speed, flotation, and ...
The PM200 combines enhanced production capabilities, optimized performance and simplified service to complete tough milling applications with productive results. Hydrostatic ...
The Cat D Series Compact Track Loaders lead the industry in operator comfort, performance and versatility. The fully suspended, steel embedded rubber track undercarriage provides...
The robust cooling system provides cool air intake to maximize fuel efficiency and minimize emissions. An on -demand variable speed fan draws ambient air from a separate compartment...
The Cat 914K Compact Wheel Loader sets a new standard for productivity, fuel efficiency and comfort. On-the-go operator tuned hydraulics and drivetrain adjust the machine’s response...
Angled cab doors, a tapered engine enclosure and patented sloped rear window assure excellent visibility to the work area.Caterpillar has built the most comfortable cab in the...
A new, factory-integrated precision grading system, Cat GRADE can help both new and experienced machine operators deliver dramatic improvements in grading efficiency over a wide...
The 303E allows you to easily reposition within a confined space and increase your overall productivity. Proficient movement is enhanced as a result of the limited tailswing and...
The ergonomic, automotive style operator station helps you work comfortably and productively all day long. Select the configuration that meets your needs - Canopy, Deluxe Cab ...
The new Cat 323F L is a purpose-built machine powered by a fuel-efficient U.S. EPA Tier 4 Final C7.1 ACERT engine. With plenty of counterweight, robust structures, a state-of-...
ROPS/FOPS cab, pressurized, with sliding side windows Air conditioning Seat, air suspension, cloth: - Adjustable armrests 76 mm (3 in.) retractable seat belt Adjustable seat-...
The H65E hammer is compact and powerful making short work of sidewalk, driveway, curb, and cinder block demolition. These breakers offer the flexibility to mount to a variety...
If your business calls for a tool-carrying machine that can take on several tight-quarter tasks like loading trucks without swinging into traffic, picking and placing heavy materials...
Cat® Product Link™ redefines fleet management effectiveness. Its easy-to-use interface, called VisionLink®, enables customized health and utilization reports, and mapping and ...
After working hours of overtime cleaning up after Hurricane Sandy in 2012, it became clear that the Sparta Township, N.J., Department of Public Works needed to replace its 1994...
The RM500 rotary mixer provides superior performance and reliability to achieve the most demanding job specifications in both full-depth reclamation and soil stabilization applications...
Don Olson had a large, messy problem on his hands. The closing of his county's landfill in Washington state and transfer of services to a new, combined site meant that the Cowlitz...
The RM500 rotary mixer provides superior performance and reliability to achieve the most demanding job specifications in both full-depth reclamation and soil stabilization applications...
The productive and reliable Cat CS56 vibratory soil compactor has a standard operating weight of 11,741 kg (25,885 lb) with optional ROPS/FOPS cab. It features a powerful Cat ...
The CB64 Asphalt Compactor features 2,130-mm(84-in.)-wide drums and is designed for wide width paving. It provides a maximum weight of 13,740 kg (30,291 lb) and is capable of ...
The AS3301C vibratory screed features electrically heated screed plates and hydraulically driven rear-mounted extenders with heavy-duty support tubes that stabilize the extenders...
