The new Cat TH255C telehandler—with a rated load capacity of 5,500 lb and a maximum lift height of 18.33 ft—features a powerful, compact design that accommodates both a wide range...
The Cat C4.4 engine on the three new models in the F Series — the 416F, 420F and 430F — upgrades power while staying up to Tier 4 Interim emissions standards features the Cat ...
Caterpillar Inc., Peoria, Ill., has introduced the PM-200 cold planer (Circle 928). The PM-200 features the electronically controlled Cat C18 engine with ACERT technology, dual...
The RM500 from Caterpillar combines excellent performance and reliability to achieve the most demanding job specifications while maximizing machine uptime, working well in both...
Caterpillar announces the new, seven-model lineup of M-Series motor graders. The new machines feature a number of concepts in motor grader design—most notably a pair of joysticks...
The new Caterpillar 938H wheel loader and IT38H with integrated tool-carrier linkage feature the Cat C6.6 engine with ACERT technology for responsive power and low emissions. ...
Caterpillar has introduced three new midsize hydraulic excavators: the 320D L with standard swing radius; the 320D LRR with reduced swing radius; and the 321D LCR with compact...
Four new Caterpillar C-Series skid-steer loaders—246C, 256C, 262C, 272C —set new standards in machine control with features such as electrohydraulic joystick control of the hydrostatic...
Caterpillar Inc.’s Barber-Greene BG260D (Circle 906) is a high-production, 10-ft wheel-type asphalt paver that features a Cat C7 engine with Acert technology, dual operator stations...
Managing the heavy equipment fleet for any municipality can be a rewarding job. But there are challenges too, particularly if your agency is under pressure to buy based solely...
The 962M operates on a Cat C7.1 ACERT engine, and is equipped with built-in proven technologies to help meet expectations for productivity and fuel efficiency. This wheel loader...
The 777G will haul material faster and more efficiently with increases in torque, new transmission controls and higher travel speeds. A 7% increase in torque (net 3,899 lb-ft)...
This telehandler uses a TD 2.9L L4 engine with 74 hp. Maximum torque on the TH255 at 1,800 rpm is 193 ft-lb. The operating weight with carriage and forks is 11,000 lb. It has ...
The 35-ton 335F CR is the largest minimum-swing-radius excavator available, with just 7 in. of tail swing over the side of 33-in. track shoes. It works at a 16% fuel efficiency...
The power train offers maximum performance through Electronic Torque Management, standard two-speed travel and an electronic hand/foot throttle with decel pedal capability.
The M Series motor graders are designed to help get more work done in less time. Features include a Cat C9.3 ACERT engine at 200 net hp. At 2,000 rpm, the maximum torque on the...
The Cat 420F2 backhoe loader puts all the machine controls at the operator’s fingertips to operate all auxiliary controls with thumb rollers. It enables operators to move from...
The Cat 315F operates with a Cat C4.4 ACERT engine at 97 hp. The operating weight on the excavator is 37,794 lb. The swing torque is at 22,790 lb-ft while the swing speed is at...
The D6T dozer features a smooth-shifting, fully automatic four-speed Cat transmission that continuously optimizes the power train for the application. It helps save fuel and operator...
An optimized drum yoke design, more amplitude and the Cat pod-style vibratory system provides enhanced compaction force for the CS56B. This vibratory soil compactor operates at...
The CB66B is a 13-metric-ton vibratory compactor equipped with 84-in. drums. This high-production model delivers excellent mat density, good visibility and comfort, fuel efficiency...
This asphalt screed has a standard weight of 8,973 lb and a maximum paving width of 33 ft. The SE60 V XW delivers extremely tight mat textures with high densities. It utilizes...
This mid-sized, rubber-track paver features advanced control technology and quick-heating electric screeds. It features the exclusive Cat Mobil-Trac rubber track undercarriage...
This high-production, rubber-track paver excels on airport runways, interstates, highways and other large jobsites. The dual operator stations provide complete control and good...
The Cat 938M small wheel loader has an improved optimized Z-bar loader linkage that delivers the quick-loading performance of a traditional Z-bar with the parallelism and load...
This telehandler uses a TD 2.9L L4 engine with 74 hp. Maximum torque on the TH255 at 1,800 rpm is 193 ft-lb. The operating weight with carriage and forks is 11,000 lb. It has ...
