TRANSIT: Sonoma-Marin, Calif. area rail project poised for 2016 ridership

June 2, 2015

Initial segment will take riders 43 miles from Charles M. Schulz–Sonoma County Airport to a transit station in downtown San Rafael

In a project that will, once opened, run 43 miles of track from the industrial parks near Charles M. Schulz–Sonoma County Airport to a transit station in downtown San Rafael, the Sonoma-Marin Area Rail Transit project looks to be passenger-ready late next year.

This stretch of track accounts for almost 80% of the total projected ridership for the line, according to SMART senior engineer Bill Gamlen at the Construction Conference at SOMO Village in Rohnert Park. The ultimate end-goal is a 70-mile line from the Cloverdale rail depot to a planned station across from the Larkspur ferry terminal. This initial segment makes a regional connection via a station to be built on Airport Boulevard, which then leads to the airline terminal.

Gamlen went on to state that SMART is purchasing seven two-car “trainsets,” a euphemism for two connected passenger cars each with diesel-electric locomotion, which are being assembled in Rochelle, Ill. for later delivery. The first of these trainsets was tested at the National Test Center in Pueblo, Colo., earlier this year and rolled into the Cotati depot for a rail system welcoming ceremony in April.

The passenger cars were specified to carry up to a couple dozen bicycles in hanging racks, which is an important piece of the overall project as a bicycle-and-pedestrian path that at times parallels the railway also connects existing paths along the route to the train stations.

“Between the bicycles and the train, we believe it will be a mobility alternative for the North Bay,” Gamlen said.

Forty-two of the original 43 miles of track, which were separate rail segments on wood ties, have been replaced with continuously welded steel rail on concrete ties with fresh ballast gravel, preventing the racketing rides of old and satisfying the need to replace rotted ties. Grade crossings were rebuilt with removable concrete panels instead of timber to allow for better maintenance.

SMART has made strides to include local businesses in the project as much as possible, as infrastructure developments have a direct effects on such businesses. The rail was rolled in Pueblo, the ties poured in Spokane, Wash., and the ballast sourced largely from North Bay quarries.

“This really is a railroad that is being built with local dollars,” Gamlen said.

A transit operations facility is being completed next to the airport station, which when ready will be able to house a two-car train inside the maintenance facility and have rail spurs for other trains out of service.

Sponsored Recommendations

The Science Behind Sustainable Concrete Sealing Solutions

Extend the lifespan and durability of any concrete. PoreShield is a USDA BioPreferred product and is approved for residential, commercial, and industrial use. It works great above...

Proven Concrete Protection That’s Safe & Sustainable

Real-life DOT field tests and university researchers have found that PoreShieldTM lasts for 10+ years and extends the life of concrete.

Revolutionizing Concrete Protection - A Sustainable Solution for Lasting Durability

The concrete at the Indiana State Fairgrounds & Event Center is subject to several potential sources of damage including livestock biowaste, food/beverage waste, and freeze/thaw...

The Future of Concrete Preservation

PoreShield is a cost-effective, nontoxic alternative to traditional concrete sealers. It works differently, absorbing deep into the concrete pores to block damage from salt ions...