Private contractor in Canada boosts winter-maintenance operations

Oct. 10, 2014

MRDC Operations Corp. (MRDC), a private enterprise responsible for maintaining and rehabilitating a 121-mile highway connecting the cities of Fredericton and Moncton in New Brunswick, Canada, began manufacturing and using salt brine several years ago for pre-wetting road salt during deicing operations and for anti-icing operations. 

Previously, MRDC manufactured salt brine using conventional brine systems installed at three major depots along the highway. Recently, MRDC implemented a program encompassing new equipment installed at one central location and holding tanks installed at each depot.

“We recognized the importance of salt brine production in relation to its usage and potential,” said Mark Kenny, professional engineer and MRDC operations manager. “We further realized that improvements or replacements to the former brine production system were necessary to attain the levels of service and efficiencies desired for providing winter-maintenance services.”

During earlier years, MRDC made salt brine on the fly during spreading operations, since the facility did not have any holding tank capacity at that time. That amounted to manufacturing over 1 million gallons of salt brine each year. 

“Because of our limited quality-control measures for checking salt concentrations at that time, we limited our anti-icing window to pavement temperatures of 23 °F and above,” said Kenny. “A hydrometer was used by the operators to measure the salt concentration in the brine prior to loading, and making brine on the fly was not deemed effective or efficient in terms of operating cost and levels of service with respect to plowing cycle times.”

With the help of other North American agencies, and the sharing of information between colleagues at American Public Works Association (APWA) shows, MRDC acknowledged it’s need to optimize liquid operations in terms of production, quality control, transportation and storage to effectively and efficiently deliver winter-maintenance services.

After researching brine makers, MRDC purchased and installed an AccuBrine automated brine maker from Cargill Deicing Technology.

As a result of the new brine-making system, MRDC has increased it’s anti-icing window from 23°F to 12°F and has raised their confidence levels with respect to quality-control measures. They also have sufficient salt brine on hand at each depot at the desired concentrations ready for the next storm.

Sponsored Recommendations

The Science Behind Sustainable Concrete Sealing Solutions

Extend the lifespan and durability of any concrete. PoreShield is a USDA BioPreferred product and is approved for residential, commercial, and industrial use. It works great above...

Proven Concrete Protection That’s Safe & Sustainable

Real-life DOT field tests and university researchers have found that PoreShieldTM lasts for 10+ years and extends the life of concrete.

Revolutionizing Concrete Protection - A Sustainable Solution for Lasting Durability

The concrete at the Indiana State Fairgrounds & Event Center is subject to several potential sources of damage including livestock biowaste, food/beverage waste, and freeze/thaw...

The Future of Concrete Preservation

PoreShield is a cost-effective, nontoxic alternative to traditional concrete sealers. It works differently, absorbing deep into the concrete pores to block damage from salt ions...