Automated brine maker provides high volume and hot mix capabilities in New Brunswick, Canada

July 23, 2015

MRDC Operations Corporation (MRDC), a private enterprise responsible for maintaining and rehabilitating a 121-mile highway connecting the cities of Fredericton and Moncton in New Brunswick, Canada, began manufacturing and using salt brine several years ago for pre-wetting road salt during deicing operations and for anti-icing operations. 

Previously, MRDC manufactured salt brine using conventional brine systems installed at three major depots along the highway. Recently, MRDC implemented a program encompassing new equipment installed at one central location and holding tanks installed at each depot.

“We recognized the importance of salt brine production in relation to its usage and potential,” said Mark Kenny, P.E. and MRDC operations manager. “We further realized that improvements or replacements to the former brine production system were necessary to attain the levels of service and efficiencies desired for providing winter maintenance services.”

During earlier years, MRDC made salt brine on the fly during spreading operations, since the facility did not have any holding tank capacity at that time. That amounted to manufacturing about 1,056,000 gal of salt brine each year. 

“Because of our limited quality control measures for checking salt concentrations at that time, we limited our anti-icing window to pavement temperatures of 23 °F and above,” said Kenny. “A hydrometer was used by the operators to measure the salt concentration in the brine prior to loading, and making brine on the fly was not deemed effective or efficient in terms of operating cost and levels of service with respect to plowing cycle times.”

With the help of other North American agencies, and the sharing of information between colleagues at American Public Works Association (APWA) shows, MRDC acknowledged their need to optimize their liquid operations in terms of production, quality control, transportation and storage to effectively and efficiently deliver winter maintenance services.

After researching brine makers, MRDC purchased and installed an AccuBrine automated brine maker from Cargill Deicing Technology. Kenny and his team were particularly intrigued by the state-of-the-art system’s automated process.

“The system optimized our ability to effectively manufacture and store salt brine, and gave us the ability to expand with hot mixes,” Kenny said. ”We have increased our storage capacity to vary between 10,000 and 32,000 gal, and we can batch brine directly from a computer after feeding salt into the hopper.”

As a result of the new brine making system, MRDC has increased their anti-icing window from 23 °F to 12 °F and has raised their confidence levels with respect to quality control measures. They also have sufficient salt brine on hand at each depot at the desired concentrations ready for the next storm.

“The system enabled us to be more advanced, effective and efficient when delivering winter maintenance services,” Kenny said. “Our team is very happy with the results. We find it particularly simple to batch salt brine at any time, and we are no longer pressured to make brine on the fly. We are confident that sufficient supply is always on-site, ready for any operation.”  

Sponsored Recommendations

The Science Behind Sustainable Concrete Sealing Solutions

Extend the lifespan and durability of any concrete. PoreShield is a USDA BioPreferred product and is approved for residential, commercial, and industrial use. It works great above...

Powerful Concrete Protection For ANY Application

PoreShield protects concrete surfaces from water, deicing salts, oil and grease stains, and weather extremes. It's just as effective on major interstates as it is on backyard ...

Concrete Protection That’s Easy on the Environment and Tough to Beat

PoreShield's concrete penetration capabilities go just as deep as our American roots. PoreShield is a plant-based, eco-friendly alternative to solvent-based concrete sealers.

Proven Concrete Protection That’s Safe & Sustainable

Real-life DOT field tests and university researchers have found that PoreShieldTM lasts for 10+ years and extends the life of concrete.