CONCRETE: Studies show cement soaks up greenhouse gases

Dec. 5, 2016

Researchers estimate how much carbon dioxide is absorbed by cement in the world

Making cement is thought to produce 5% of all global greenhouse gas emissions from fossil fuels and factories. But cement may eventually suck some of that carbon dioxide (CO2) back up—enough to cancel nearly a quarter of the gases released making cement, according to a new study.

To make cement, limestone (calcium carbonate) is turned into lime (calcium oxide) by baking it at temperatures topping 1000°C. That conversion releases large amounts of CO2—half cement’s total greenhouse gases. The other half comes from fossil fuels used to heat cement kilns. 

The good news is that mortar, concrete and rubble from demolished buildings can gradually absorb CO2 through a process called carbonation. As CO2 from the air enters tiny pores in the cement, it encounters a variety of chemicals and water trapped there. The ensuing reactions convert CO2 into other chemicals, including water. Still, just how much CO2 the world’s cement soaked up had never been estimated.

So a team of Chinese scientists now at the California Institute of Technology in Pasadena, set out to do just that. Those researchers eventually teamed up with an earth systems scientist at the University of California, Irvine, and other U.S. and European researchers. Together, they compiled data from studies of how cement is used around the world, including the thickness of concrete walls, the quality of concrete used in different structures, the life spans of concrete buildings, and what happens to the concrete after the buildings are torn down. The scientists also visited construction sites around China—the world’s largest producer of cement—to get more accurate estimates of a variety of factors that influence how much CO2 the cement absorbs. This included everything from the size range of concrete rubble and how long it was left in the open air, to how much cement was used in thick concrete versus thin layers of mortar spread on walls, where it is exposed more readily to CO2.

The results cast a different light on the cumulative impact cement has on the climate. The researchers estimate that between 1930 and 2013, cement has soaked up 4.5 gigatons of carbon or more than 16 gigatons of CO2, 43% of the total carbon emitted when limestone was converted to lime in cement kilns, they report online in Nature Geoscience. That is more than 20% of the carbon soaked up by forests in recent decades, they write.

According to a scientist at Stanford University, the findings do not represent a dramatic change in the overall picture of greenhouse gas emissions. However, it adds another piece of information to the part of carbon models that is particularly prone to uncertainty—how much carbon is soaked up on land. In future inventories, cement will need to be added to the list of things that absorb carbon from the atmosphere.

One researcher believes it is conceivable that in the future cement could even suck up more CO2 than it produces. But that, according to the researcher, would take switching away from fossil fuels, and finding a way to capture and dispose of the gases coming from the limestone at cement factories.