Caltrans approves use of low-carbon cement to reduce carbon footprint in transportation

Department to advance use of portland limestone cement (PLC) in order to generate less carbon dioxide

January 26, 2022 / 2 minute read
road pavement

The California Department of Transportation (Caltrans) this week announced it is approving the use of low-carbon cement to help reduce the carbon footprint of the state's transportation system.

Caltrans plans to advance the use of portland limestone cement (PLC) in order to generate less carbon dioxide in road construction and maintenance projects with the same high performance standards at a slightly lower cost, the department said in a news release.

“Using low-carbon cement can cut Caltrans’ concrete-related carbon dioxide emissions annually by up to 10%," Caltrans Director Toks Omishakin said in a statement. "This is a big step in supporting California’s efforts to achieve carbon neutrality by 2045.”

According to Caltrans, cement is typically produced by mining, grinding, and heating limestone in industrial kilns to temperatures as high as 2,820°F. The process alters the rock’s chemistry and creates “clinker”—the basic component in nearly all types of cement—but also generates large quantities of carbon dioxide. PLC contains less clinker, the department says.

In 2017 alone, Caltrans used 325,000 tons of cement to upgrade the state highway system. Switching to low-carbon cement has the potential to reduce carbon dioxide emissions by 28,000 tons a year—the equivalent of removing more than 6,000 cars off the road. Caltrans expects that the reduced energy needs associated with PLC production will make the cost similar or slightly less when compared to regular cement. 

The new low-carbon cement standards are based on Caltrans-funded research conducted at Oregon State University, which concluded that PLC is equally suitable for Caltrans’ construction projects as ordinary cement with a reduced carbon footprint.

In 2010, Caltrans changed its concrete standard specifications to increase the use of sustainable alternatives in transportation projects, an initiative that helped spur a shift in concrete production throughout the state.

-----------

SOURCE: Caltrans

Related Articles

Sudden rain events plagued crews during the Vine & Washington intersection rehabilitation project, leaving workers scrambling to tarp freshly laid concrete against dense and driving rain.
Sudden rain events plagued crews during the Vine & Washington intersection rehabilitation project, leaving workers scrambling to tarp freshly laid concrete against dense and driving rain.
Alkali-silica reaction, commonly referred to simply as ASR, is considered to be, by those in the know, concrete cancer. According to the Portland…
February 03, 2021
Sponsored
When portions of two busy Kansas interstates, I-70 and I-635, were due for repair, the Kansas DOT (KDOT) needed a patching solution that would help…
October 14, 2020
In Foxboro, Massachusetts, crews completed a Low-P application over one weekend, avoiding disruption to weekday traffic.
In Foxboro, Massachusetts, crews completed a Low-P application over one weekend, avoiding disruption to weekday traffic.
Sponsored
Concrete is a primary construction material for hundreds of thousands of bridges and bridge decks throughout the U.S. As state DOTs look to preserve…
April 03, 2020
Shaped by Concrete Portland Cement Association
Image: Shaped by Concrete on Twitter (@By_Concrete)
The Portland Cement Association (PCA) today announced Shaped by Concrete, a new educational campaign to increase awareness of the sustainability,…
February 07, 2020
expand_less