Missouri engineers testing use of plastic waste in road pavement mixtures

Aug. 25, 2021

Engineers, students determining how to incorporate various types of plastic waste into asphalt pavement

Engineers at the University of Missouri are partnering with Dow and the Missouri Department of Transportation (MoDOT) to test mixing plastic waste into the asphalt pavement mixtures for possible use on American roadways and bridges.

Asphalt pavement mixtures are typically created from a mixture of asphalt and other materials (aggregates) such as stone, sand, or gravel, said Bill Buttlar, the Glen Barton Chair in Flexible Pavements in the Department of Civil and Environmental Engineering at U Missouri. He said in a news release that the chemical makeup of plastic helps it become a good product for road pavement mixtures.

“Plastic was developed to be durable and has a shelf life of hundreds of years,” Buttlar said in a statement. “Asphalt and plastics are also chemically similar because they both come from crude oil, so they can be mixed together. They aren’t perfectly compatible, but it’s close enough that engineers and chemists can work together to find a workable solution.”

Inside the Mizzou Asphalt Pavement and Innovation Lab (MAPIL), located in the MU College of Engineering, engineers and students are determining how to incorporate various types of single-use, polyethylene-based plastic waste into asphalt pavement, including drinking bottles, grocery bags, and drinking straws.

MU’s engineers and students get to test their lab-developed mixture in a real-world environment when it is applied as a pavement overlay, or a new layer of asphalt, to a deteriorating section of road surface, along a stretch of Stadium Boulevard in Columbia from College Ave. to U.S. Highway 63 where traffic averages approximately 36,000 vehicles a day. Buttlar said to confirm the results, the team will need to observe the nearly 2-mile test area for at least one year, including one summer and one winter season. He said a pavement overlay should last for at least a decade, or about 12-15 years, before needing to be replaced, and recycled materials such as plastic and tire rubber can also extend pavement life by increasing both its strength and toughness.

The full story can be found on the University of Missouri's website.

-----------

SOURCE: Show Me Mizzou (University of Missouri)

Sponsored Recommendations

The Science Behind Sustainable Concrete Sealing Solutions

Extend the lifespan and durability of any concrete. PoreShield is a USDA BioPreferred product and is approved for residential, commercial, and industrial use. It works great above...

Proven Concrete Protection That’s Safe & Sustainable

Real-life DOT field tests and university researchers have found that PoreShieldTM lasts for 10+ years and extends the life of concrete.

Revolutionizing Concrete Protection - A Sustainable Solution for Lasting Durability

The concrete at the Indiana State Fairgrounds & Event Center is subject to several potential sources of damage including livestock biowaste, food/beverage waste, and freeze/thaw...

The Future of Concrete Preservation

PoreShield is a cost-effective, nontoxic alternative to traditional concrete sealers. It works differently, absorbing deep into the concrete pores to block damage from salt ions...