Commuting headaches have grown dramatically for Lake Champlain residents since bridge closed
A group of people gathered on the Vermont statehouse steps on Nov. 17 to demand quicker action on setting up a temporary ferry to take the place of the Lake Champlain Bridge, which was closed on Oct. 16 because of cracks in its piers, the Burlington Free Press reported.
“I’m very frustrated at the pace this is going,” Dana Franklin told the Burlington Free Press. Franklin and his wife, Lorraine, own the West Addison General Store down the road from the bridge. “If we don’t have ferry service by Dec. 31, our store alone will probably lose a quarter-million in gross revenue. For a small business, that is huge.”
The bridge across Lake Champlain from Addison to Crown Point, N.Y., was used by about 3,400 vehicles a day. The 80-year-old bridge was closed to traffic on Oct. 16 after cracks were found in its concrete piers.
“The severity of the deterioration at water level and the wide cracks reported below the water level in all the piers . . . reinforce our recommendation to close the bridge,” HNTB, the New York State Department of Transportation’s design consultant for the bridge, said in a safety assessment last week.
A replacement bridge would probably cost $67 million, according to HNTB, but rehabilitating the old bridge to significantly add to its service life would cost more, take longer to execute and yield less useful life than a new bridge.
One of the commuters in the group of about 15 said her morning trip to work has ballooned from 33 minutes to two hours.
A spokesman for the Vermont Agency of Transportation told the rally that work on the docks needed for a new ferry should begin late this week or early next week.
The frustrated crowd said they hoped the Vermont agency would take a bigger role in monitoring the health of the new bridge. The existing Lake Champlain Bridge is co-owned by Vermont and New York, but New York is in charge of its maintenance.
More like this
Roads&Bridges Videos
Products
2921 Products
-
The ComNet FVT/FVRHDMI transmits a high-resolution HDMI signal over one multimode fiber up to 500 meters for the 1080p60 format. The FVT/...
-
RTMS (Remote Traffic Microwave Sensor) is a non-intrusive, radar-based detection system renowned for long-term, worry-free reliability and...
-
Volvo almost completely redesigned its B-Series of backhoe loaders, which includes the BL60B and BL70B. Among the changes is a new set of...
-
Maximizing productivity and efficiency is the key to the eight models in John Deere’s K Series of backhoe loaders, which also features a pair...
-
JCB has extended the reach, both literally and figuratively, of its ICX backhoe loader with longer loader arms (by 4 inches) and an extending dipper...
-
Allowing man and machine to work together more efficiently was the goal of the upgrades to Terex’s TLB 840 backhoe loader, starting with the...
-
The C Series from New Holland Construction offers the B95C LR (long reach) and the B95C TC (tool carrier). The LR is more compact with a longer stick...
-
Case’s N Series of loader backhoes — which includes the 580N, 580 Super N, 580 Super N Wide Track and 590 Super N — are driven by Tier 4-...
-
The Cat C4.4 engine on the three new models in the F Series — the 416F, 420F and 430F — upgrades power while staying up to Tier 4 Interim emissions...
-
Versatility is the name of the game with the L45 Tractor-Loader-Backhoe from Kubota, a 3-in-1 machine with a 45-hp Kubota diesel engine at its...









