Minnesota’s County Road No. 7 reconstructed to support 10-ton traffic

Feb. 17, 2012

Minnesota’s Kandiyohi County Road No. 7 was in need of reconstruction.

 

“This segment of the grading and bituminous surfacing project was projected to receive a lot of heavy truck traffic with a projected [average daily traffic] of 883,” said Assistant County Engineer Ray Krossman.

 

Minnesota’s Kandiyohi County Road No. 7 was in need of reconstruction.

“This segment of the grading and bituminous surfacing project was projected to receive a lot of heavy truck traffic with a projected [average daily traffic] of 883,” said Assistant County Engineer Ray Krossman.

The original structure design was 9 in. of MN Class 5 aggregate base and 5.5 in. of bituminous surface to carry 10-ton traffic. The goal was to eliminate 1.5 in. of the bituminous surfacing by using Team Laboratory Chemical Corp.’s Base One Aggregate Base Stabilizer to increase the Granular Equivalency (GE) value of the aggregate base material, maintain a 10-ton design, and have a cost savings.

The final design approach was to grade the project in 2010 with 9 in. of MN Class 5 aggregate base and stabilize the top 4 in. of the base material.

“During the grading project we encountered poorer soil conditions than expected in three areas of the project,” said Krossman. Braun Intertec, an independent testing company, conducted deflection testing after the application of the base stabilizer and determined that the three problem areas would require more than 4 in. of bituminous.

In 2011 Kandiyohi County placed an additional 3 in. of stabilized aggregate base material in the three weak areas and 4 in. of bituminous on the entire 5.5-mile project.

Braun Intertec conducted deflection testing on the final surface resulting in 10-ton capacity for the entire road.

After comparing the original structure design cost to the final design cost, Kandiyohi County had a cost savings of $190,000 on the project.

Sponsored Recommendations

The Science Behind Sustainable Concrete Sealing Solutions

Extend the lifespan and durability of any concrete. PoreShield is a USDA BioPreferred product and is approved for residential, commercial, and industrial use. It works great above...

Proven Concrete Protection That’s Safe & Sustainable

Real-life DOT field tests and university researchers have found that PoreShieldTM lasts for 10+ years and extends the life of concrete.

Revolutionizing Concrete Protection - A Sustainable Solution for Lasting Durability

The concrete at the Indiana State Fairgrounds & Event Center is subject to several potential sources of damage including livestock biowaste, food/beverage waste, and freeze/thaw...

The Future of Concrete Preservation

PoreShield is a cost-effective, nontoxic alternative to traditional concrete sealers. It works differently, absorbing deep into the concrete pores to block damage from salt ions...