Rapid Set DOT Cement is a material of choice for the South Carolina DOT

July 13, 2021

Located along South Carolina Highway 544 (SC 544) in Myrtle Beach, the Corporal Dennis Lyden Memorial Highway Bridge was in serious need of repairs.

Portions of the four-lane deck and riding surface were cracked or deteriorated. In many places, the rebar was found to be too close to the surface, which in turn caused delamination.

In March 2020, South Carolina DOT (SCDOT) District 5 contracted Lee Carolinas—based in Charlotte, North Carolina—to perform partial-depth repairs on the bridge deck.

Using Rapid Set DOT Cement for the repair work was an easy decision for the contractor. The fast-setting cement is on the transportation department’s list of qualified products because it meets all SCDOT specifications. It includes air entrainment for durability in regions where freeze-thaw cycles are more prominent, and a superplasticizer to provide better workability. In the case of the Dennis Lyden Bridge, DOT Cement was blended with SCDOT-approved sand and stone and achieved 3,500-psi compressive strength within three hours to meet the project requirement.

Rapid Set DOT Cement is fast setting and typically meets structural strength in one hour. The material’s rapid-hardening characteristics and quick strength gain were critical to the project, as the demolition and repair work had to be performed overnight so the bridge could be returned to service by 6:30 a.m. each morning. 

The size of the repair areas varied each night. The contractor averaged placing 2 to 2.5 cubic yd of material nightly—which was supplied by Superior Mobile Concrete of Greenville, South Carolina—via volumetric mixers. The Lee Carolinas’ crew then screeded level, hand-troweled the repaired areas, and applied a broom finish. They sprayed a curing compound over the repaired areas and covered them with a wet burlap for curing.

The concrete patching work was completed May 1, 2020. All parties were pleased with the results. Lee Carolinas continues to perform critical bridge deck preservation work for SCDOT using Rapid Set Cement products.

---------------

Editor's Note: Scranton Gillette Communications and the SGC Infrastructure Group are not liable for the accuracy, efficacy and validity of the claims made in this piece. The views expressed in this content do not reflect the position of the Roads & Bridges' Editorial Team.

Sponsored Recommendations

The Science Behind Sustainable Concrete Sealing Solutions

Extend the lifespan and durability of any concrete. PoreShield is a USDA BioPreferred product and is approved for residential, commercial, and industrial use. It works great above...

Powerful Concrete Protection For ANY Application

PoreShield protects concrete surfaces from water, deicing salts, oil and grease stains, and weather extremes. It's just as effective on major interstates as it is on backyard ...

Concrete Protection That’s Easy on the Environment and Tough to Beat

PoreShield's concrete penetration capabilities go just as deep as our American roots. PoreShield is a plant-based, eco-friendly alternative to solvent-based concrete sealers.

Proven Concrete Protection That’s Safe & Sustainable

Real-life DOT field tests and university researchers have found that PoreShieldTM lasts for 10+ years and extends the life of concrete.