WORK ZONES: 38% of highway contractors see vehicle crashes

Work-zone crashes are more likely to kill vehicle operators and passengers than construction workers

Work-Zone News AGC April 16, 2013
Printer-friendly version

Thirty-eight percent of highway contractors had motor vehicles crash into their construction work zones during the past year, according to the results of a new highway work-zone study conducted by the Associated General Contractors of America (AGC). Association officials added that the study found work-zone crashes are more likely to kill vehicle operators and passengers than construction workers.

 

“Any time your jobsite is just a few feet away from fast-moving traffic, danger is never far away,” said Mike Hoover, the chair of the AGC’s national highway and transportation division and executive vice president of Tempe, Ariz.-based Sundt Construction. “When you see construction signs and orange barrels, take your foot off the gas, put the phone down and keep your eyes on the road.”

 

Hoover said that 46% of contractors reported that motor vehicle operators or passengers were injured during work-zone crashes this past year, and 14% were killed in those crashes. While they are less likely to kill construction workers, highway work-zone crashes do pose a significant risk for people in hardhats, Hoover added. He noted that more than 18% of work-zone crashes injure construction workers, and 8% of those crashes kill them.

 

Work zone crashes also have a pronounced impact on construction schedules and costs, Hoover said. He noted that 21% of contractors reported that work-zone crashes during the past year have forced them to temporarily shut down construction activity. Those delays were often lengthy, as 30% of those project shutdowns lasted two or more days.

 

AGC officials said that 68% of contractors nationwide feel that tougher laws, fines and legal penalties for moving violations in work zones would reduce injuries and fatalities. And 70% of contractors nationwide agree that more frequent safety training for workers could help. They added that many firms and the association have crafted these types of highway safety programs.

 

But Hoover suggested that the best way to improve safety was for motorists to be more careful while driving through highway work zones.

 

“The best way to improve work-zone safety is to get motorists to slow down and pay attention,” Hoover said.

 

The work-zone safety study was based on a nationwide survey of highway construction firms conducted by the association in March and April of this year. Nearly 800 contractors completed the survey nationwide, while a large enough sample of contractors in eight states completed the survey to allow for state-specific results.

Overlay Init