Waterblasting Technologies

Printer-friendly version
3170 SE Slater St
Stuart, FL
United States
34997
772.223.7393

Waterblasting Technologies manufactures the Stripe Hog™ Waterblasting System. A Stripe Hog Waterblasting System is a mobile, ultra-high pressure waterblasting system that incorporates a powerful vacuum recovery system and a water and debris separation system on-board. The Stripe Hog Waterblasting System uses needle sharp water jets to quickly remove all types of roadway and airfield pavement markings as well as runway rubber deposit build-up from aircraft landings. The Stripe Hog performs these tasks with the least amount of impact to the surface.


The waterblasting system is also capable of being used for the cleaning of existing pavement markings to restore reflectivity  removal of curing compound on new concrete before new markings are applied, and for the retexturing of pavement surfaces in order to restore friction levels.


The Stripe Hog can be configured for almost any removal project, including the cleaning of vertical surfaces, such as barrier walls, and for the cleaning of tunnels. This versatility has been a considerable driving factor in making the Stripe Hog the number one waterblasting removal system in the world with more units operating around the world than our top 4 competitors COMBINED!


Products

  • It’s a blast removing pavement markings from roads and runways with a Stripe Hog. For the fourth consecutive year, the Stripe Hog Waterblasting System has earned the Gold Award in the annual ROADS...
  • The Stripe Hog stripe removal system from Waterblasting.com removes all types of pavement markings from roads and runways through the use of water blasting. The unit places the operator close to the...
In south Florida, particularly the populous southeast corner of the state, traffic approaches the congested density of Los Angeles’ freeway system.   Florida highways are busy, and rush hours are not confined to weekday mornings and evenings. Traffic is nonstop, seven days a week, about 20 hours...
Overlay Init