Details emerge regarding work performed on FIU bridge before collapse

March 23, 2018

NTSB said workers were adjusting cables at the north end of the bridge at the time of the collapse, which they had previously done on the south end

Before workers began adjusting support cables at the north end of the Florida International University (FIU) bridge that collapsed and killed six people last week, they performed the same work at the opposite end of the bridge, the National Transportation Safety Board (NTSB) said in a statement Wednesday.

Adjusting the cables has come under scrutiny as investigators try to explain why the 950-ton span fell suddenly, just five days after it was lifted into place over Southwest Eighth Street near the campus.

Workers had begun adjusting the tension in two rods threaded through diagonal bridge trusses on the north side just before the collapse. The crew was beginning work on the second rod when the 174-ft-long span abruptly dropped.

The work may have been related to cracks in the span’s concrete, reported just two days before the collapse by the project’s lead technical engineer. While he said repairs would need to be made, he did not consider them to be a safety concern. The reason for the road remaining open during the work is part of the investigation.

Engineers not working on the project have speculated that the cracks may have led to adjusting the post-tensioning cables, which strengthen the concrete against the stress of being pulled, and caused the failure.

As part of its investigation, the NTSB is focusing on the span’s north end and is working to remove sections of the span’s floor, the canopy and at least one truss that includes vertical and diagonal members. Investigators also took more core samples from the concrete, adding to earlier samples collected.

---------

Source: Miami Herald

Sponsored Recommendations

The Science Behind Sustainable Concrete Sealing Solutions

Extend the lifespan and durability of any concrete. PoreShield is a USDA BioPreferred product and is approved for residential, commercial, and industrial use. It works great above...

Powerful Concrete Protection For ANY Application

PoreShield protects concrete surfaces from water, deicing salts, oil and grease stains, and weather extremes. It's just as effective on major interstates as it is on backyard ...

Concrete Protection That’s Easy on the Environment and Tough to Beat

PoreShield's concrete penetration capabilities go just as deep as our American roots. PoreShield is a plant-based, eco-friendly alternative to solvent-based concrete sealers.

Proven Concrete Protection That’s Safe & Sustainable

Real-life DOT field tests and university researchers have found that PoreShieldTM lasts for 10+ years and extends the life of concrete.