Chesapeake Seals the Deal   Water Engineering & Management May 2003   Watertight Storm Sewer Group
The City of Chesapeake, Va. is located in the region called Hampton Roads, the 27th largest metro area in the country with more than 1.5 million residents. With an annual rainfall of approximately 48", its designers must contend with the prospects of determining where 294 billion gallons of water will go. A large share of this rainfall will find its way into the storm sewers. Last year, the City Council appropriated an extra $467,600 for contract cave-in repairs. The City of Chesapeake has recognized this problem and is developing a program to address it.
PDF Version

George Warren Fuller, Industry Pioneer   Water Engineering & Management May 2003   Bill Swichtenberg
The George Warren Fuller Award is presented annually to one member of each section of the American Water Works Association (AWWA). It is based on recommendations from the sections for distinguished service in the water supply field and "in commemoration of the sound engineering skill, the brilliant diplomatic talent and constructive leadership talent" that characterized Fuller's life.
PDF Version

Bottled Water Testing   Water Quality Products October 2002   Kristin Safran and Barbara L. Marteney, National Testing Laboratories
Consumers want to know if the bottled water they buy is safe. How and why bottled water is regulated is not common knowledge and can be confusing to customers. Bottlers who understand and can explain aspects of water quality, regulations and test results to their customers have a useful sales tool to promote their product.
PDF Version

Concord, N.C. - A Proactive Approach to Beginning a CMOM-Based Program   Water Engineering & Management August 2002   Ron Geiger, PE, and Todd Schuster
The federal government is in the process of establishing a CMOM philosophy for wastewater collection and treatment facilities that hinges on an aggressive, proactive approach, calling for utilities to act like investigative reporters rather than firefighters. Eventually, utility providers will have to follow federal CMOM guidelines, and states may establish similar guidelines.
PDF Version

Monitoring Drinking Water Regulation Updates   Water Quality Products August 2002   Carlyn Meyer, Water Quality Association
The Water Quality Association (WQA) and the point-of-use/point-of-entry (POU/POE) industry as a whole face the usual list of federal and state regulatory challenges in 2002-2003.
PDF Version

Know Your Bottled Water Regulations   Water Quality Products August 2002   Joseph K. Doss, International Bottled Water Association
The International Bottled Water Association (IBWA) tracks and takes action on a number of relevant issues. The goal is to ensure fair and equitable treatment of bottled water companies and to help the industry continue to deliver safe, high-quality bottled water products to a thirsty consumer market. In 2001, IBWA was engaged on both the federal and state legislative fronts, working hard to represent the bottled water industry and seeking the adoption of sensible, effective laws and regulations.
PDF Version

Arsenic in Drinking Water - Part 4   Water Engineering & Management June 2002   John T. O’Connor, EngD, P.E.
Editor’s Note: Part 1 of this series provided a timeline for the development of a drinking water standard for arsenic. It also summarized the political and public reactions to the U.S. EPA decision to delay and withdraw the arsenic rule. Part 2 dealt with human exposure and advances in knowledge concerning human health effects of exposure to arsenic. Part 3 summarized early data on the occurrence of arsenic in U.S. waters.
PDF Version

Arsenic in Drinking Water - Part 3   Water Engineering & Management May 2002   John T. O’Connor, EngD, P.E.
Only recently has a substantial amount of data become available on the concentrations of arsenic in United States drinking water supplies. Most of these data have been accumulated by the state regulatory agencies responsible for monitoring drinking waters. Since the arsenic standard has been 50 µg/L, some state agencies have recorded arsenic concentrations only in excess of that concentration. Others have been limited by the sensitivity of the analytical techniques and equipment used for the arsenic analysis. As a result, much of the available arsenic data are “below the limits of detection.
PDF Version

Arsenic in Drinking Water - Part 1   Water Engineering & Management February 2002   John T. O’Connor, EngD, P.E.
The National Academy of Sciences, National Research Council (NAS-NRC) report was released on September 11, 2001. It concluded that the existing health effects data on arsenic essentially were sound. In addition, their review of three new epidemiological studies indicated that the health risks posed by arsenic in drinking water were greater than previously believed. As a result, in October, well before its self-imposed deadline, EPA rescinded its March implementation ban and endorsed the 10 µg/L arsenic MCL.
PDF Version

Only Time Will Tell   Water Quality Products January 2002   Multiple Authors
The unprecedented events of Sept. 11 and the recession that began hitting our nation at the beginning of 2001 created havoc in the business world. The water industry was no exception; it also saw its share of fluctuation. With such an unpredictable economy, we move into 2002. WQP asked industry professionals nationwide to comment on what the water industry may see in the upcoming year. Although these professionals share their outlooks for next year, only time will tell what lies ahead.
PDF Version

POU Options for Arsenic   Water Quality Products November 2001
The topic of arsenic has received a lot of press coverage this year, ever since the Bush administration halted the EPA’s newly issued maximum contaminant level (MCL) of 10 parts per billion (ppb). Since then, the MCL was reinstated back to 50 ppb and further discussions and studies have continued. This article will discuss some of these updates.
PDF Version

Testing Bottled Water   Water Quality Products September 2001   Barbara L. Marteney and Kristin Safran, National Testing Laboratories
One of the most important (and sometimes the most complex) area of the bottled water business is compliance with federal, state and industry regulations. As the EPA continues to evaluate contaminants in drinking water for regulation under the Safe Drinking Water Act (SDWA), the FDA must review these regulations for their suitability for bottled water.
PDF Version

Water Tests Protect Customers from Guilty Parties   Water Quality Products September 2001   Wendi Hope King, WQP Staff
Despite the regulations set for treatment plants, the general public will find itself focusing on the negative and seeking additional treatment from our industry. This spells opportunity for water treatment dealers to illustrate how their services can benefit the public.
PDF Version

Volatile Organic Chemicals in Drinking Water   Water Quality Products March 2001   Marianne R. Metzger and Tami E. Castelli, National Testing Laboratories, Ltd.
When addressing water treatment needs, the average person usually wants to remedy his water of items that cause laundry stains, unpleasant "egg-like" or musty odors and buildup on pipes and fixtures. While the contaminants that cause these problems certainly present legitimate reasons for treatment, it is the "silent" contaminants in our drinking water that cause the most problems with everyday health.
PDF Version