Project will include concrete slab rehab and joint repair on a 13,400-ft runway
The U.S. Department of Transportation's Federal Aviation Administration has announced that Dallas-Fort Worth International Airport (DFW) will receive a $2.3 million grant from American Recovery and Reinvestment Act (ARRA) funds to rehabilitate a runway critical to the airport's capacity. With this grant, all of the FAA's ARRA dollars have been committed to 360 projects, many of which will remain under construction well into 2010.
Significantly, the FAA had anticipated being able to fund 300 ARRA projects, but because of lower-than-expected bids, was able to fund 360 projects.
"Recovery Act dollars are putting people back to work in good-paying jobs making needed improvements at airports across the country," said U.S. Transportation Secretary Ray LaHood. "Without this money, many of these airport authorities would not have had the resources to hire workers and get these projects started."
Under ARRA, $1.1 billion has been made available to airports nationwide. Many more airport projects than expected were eligible to be paid for with ARRA dollars because of low construction bids. With today's announcement, 326 grants have been distributed to airports that support not only passenger and cargo service but general aviation as well.
Construction on the DFW project is expected to begin in early January and will include the rehabilitation of various concrete slabs and joint repairs on the 13,400-ft runway. The work will help enhance safety by eliminating the opportunity for debris to develop along the runway surface.
More like this
Roads&Bridges Videos
Products
9264 Products
-
The ComNet FVT/FVRHDMI transmits a high-resolution HDMI signal over one multimode fiber up to 500 meters for the 1080p60 format. The FVT/...
-
RTMS (Remote Traffic Microwave Sensor) is a non-intrusive, radar-based detection system renowned for long-term, worry-free reliability and...
-
Volvo almost completely redesigned its B-Series of backhoe loaders, which includes the BL60B and BL70B. Among the changes is a new set of...
-
Maximizing productivity and efficiency is the key to the eight models in John Deere’s K Series of backhoe loaders, which also features a pair...
-
JCB has extended the reach, both literally and figuratively, of its ICX backhoe loader with longer loader arms (by 4 inches) and an extending dipper...
-
Allowing man and machine to work together more efficiently was the goal of the upgrades to Terex’s TLB 840 backhoe loader, starting with the...
-
The C Series from New Holland Construction offers the B95C LR (long reach) and the B95C TC (tool carrier). The LR is more compact with a longer stick...
-
Case’s N Series of loader backhoes — which includes the 580N, 580 Super N, 580 Super N Wide Track and 590 Super N — are driven by Tier 4-...
-
The Cat C4.4 engine on the three new models in the F Series — the 416F, 420F and 430F — upgrades power while staying up to Tier 4 Interim emissions...
-
Versatility is the name of the game with the L45 Tractor-Loader-Backhoe from Kubota, a 3-in-1 machine with a 45-hp Kubota diesel engine at its...









